Kitchen Cabinet Components Checklist: Cabinets, Panels, Fillers and Toe Kicks

Kitchen Planning & Storage  |  Updated August 10, 2026  |  10 min read  |  Reviewed by Nerro Cabinet Support

A complete kitchen cabinet order is more than a group of cabinet boxes. It usually combines storage cabinets, appliance-related cabinets, corner solutions and the finishing parts that connect the layout to walls, exposed sides and the floor.

This kitchen cabinet components checklist explains the job each component performs so you can compare your cart with a confirmed plan. It only covers components currently represented in Nerro's front-end collections; exact dimensions, finishes and compatibility must be confirmed on the relevant product page.

Kitchen cabinet components at a glance

This map is a planning aid. Product availability, dimensions, included parts and compatibility can change by collection and should be confirmed on the current Nerro product pages.

Start with the confirmed plan and one collection

Do not begin by adding isolated cabinets that look useful. Begin with the latest confirmed kitchen plan or cabinet list. It should show where each cabinet belongs, the size assigned to that location and the appliance or wall condition beside it.

Choose the Nerro collection before building the component list. Painted Cabinets and Euro Kitchen are separate systems with their own cabinet and finishing-part selections. Do not assume a panel, filler, door or cabinet from one system can be used with the other unless the product information confirms compatibility.

A useful worksheet has one row for every planned component: location, component type, size, quantity, selected collection, finish and product link. That makes the cart easier to compare with the drawing before checkout.

Upper, lower, drawer and pantry cabinets

These four groups form the main storage structure in many cabinet lists. Their names describe where the cabinet sits or how the storage works, but the exact configuration still comes from the product page and confirmed plan.

Upper or wall cabinets

Upper cabinets mount to the wall above base-level storage, work surfaces or appliances. Confirm width and height, the number of doors, the opening direction where applicable and the relationship to windows, hoods, microwaves and tall cabinets.

Lower or base cabinets

Lower cabinets sit at floor level and support the planned work-surface zone. The cabinet list should distinguish door cabinets, drawer cabinets, sink positions, appliance conditions and corners instead of treating every lower position as the same component.

Drawer cabinets

Drawer cabinets provide pull-out storage in a base position. Confirm the drawer configuration, the cabinet width and any nearby handle, door or appliance clearances shown in the plan.

Pantry or tall cabinets

Pantry cabinets create full-height storage. Confirm cabinet height, width and door layout, plus ceiling, bulkhead, floor and adjacent-cabinet conditions. A tall cabinet can affect how the upper and lower runs terminate beside it.

Appliance and corner cabinets need exact context

Nerro's front end includes cabinet categories for fridges, stoves, microwaves and sinks, plus upper and lower corner cabinets. These are not interchangeable labels. Each category addresses a specific condition in the layout.

For an appliance-related cabinet, use the appliance manufacturer's current specification sheet and the opening shown in the confirmed plan. A general statement such as "standard fridge" or "standard microwave" is not enough to select a cabinet.

For a corner, confirm whether the plan calls for an upper or lower corner cabinet, how neighbouring cabinets meet it and whether adjacent doors, drawers and handles have the required movement. The plan determines which corner solution belongs in the order.

Panels, fillers, toe kicks and moulding finish the run

Finishing parts are easy to miss because they do not always look like storage. They solve visible edges, planned gaps and transitions between cabinets and the room.

Finished panels

Finished panels are used where the plan requires a finished exposed surface. Confirm which cabinet side is visible, the required panel size and the collection and finish it must match.

Fillers

Fillers address planned space between a cabinet and another condition, such as a wall or an adjacent run. A filler is not a correction for an unconfirmed layout; its location and size should already be shown or accounted for in the plan.

Toe kicks and moulding

Toe kicks finish the visible area at the bottom of base-level cabinet runs. Moulding can address another planned edge or transition. Confirm the required length, finish and installation location instead of adding a default quantity.

Build the order in a practical sequence

1. Choose one collection. Establish the cabinet and finish system before selecting components.
2. List the main cabinet boxes. Work through each wall or zone on the confirmed plan.
3. Add appliance and corner conditions. Match them to current appliance specifications and the drawing.
4. Trace exposed sides and gaps. Identify panels, fillers and other planned finishing parts.
5. Calculate toe-kick and moulding needs. Use the actual runs and transitions, not a default allowance.
6. Compare the cart with the plan. Check component type, size, quantity, finish and product link line by line.

The Nerro buying support page provides a final review path before checkout.

Final component check before checkout

• Every cabinet and finishing part has a clear location on the confirmed plan.
• The collection and finish are consistent across compatible components.
• Widths, heights, quantities and opening directions where applicable match the latest list.
• Appliance-related selections use current manufacturer specifications.
• Exposed sides, wall gaps, floor transitions and run endings have been reviewed.
• The installer can compare the final order confirmation with the same plan used to build the cart.

Nerro provides product information and buying support based on the customer's confirmed plan and cabinet list. Customers remain responsible for measurements, planning accuracy and qualified installation.

Frequently asked questions

Do I need panels and fillers for every kitchen?

No. These components depend on the confirmed layout, exposed surfaces, planned gaps and collection. Add them only where the plan requires them.

Is a drawer cabinet the same as a lower cabinet?

A drawer cabinet occupies a base-level position, but its storage configuration is different from a door-based lower cabinet. Keep it as a separate line in the cabinet list.

Can I choose cabinet components without a final plan?

You can review products, but the order should not be finalized until each component, size and quantity can be matched to a confirmed kitchen plan.

Can Painted and Euro components be mixed?

Do not assume compatibility across collections. Only combine items when the current product information explicitly confirms that they work together.